ATI M24 VIDEO DRIVER

Option “ColorTiling2D” ” boolean “. The same as the screen depth. It has two values: Section “Device” Identifier ” devname ” Driver “radeon” Precision in bits per pixel of the shared depth buffer used for 3D acceleration. The default is to enable hardware acceleration. Advanced Micro Devices, Inc.

Uploader: Meztitaxe
Date Added: 27 February 2005
File Size: 44.55 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5819
Price: Free* [*Free Regsitration Required]

Option “EnablePageFlip” ” boolean “. As an alternative, you can install a newer release of Ubuntu.

Enable DRI2 page flipping. Graphics cards and APUs.

Note that an output name must always be specified, even if only one EDID is specified. If you get an empty area at the right usually pinkdecrease it. Should only be used when driver cannot detect the correct panel size. It can be done with the following command: You may specify a semicolon-separated list of output name and filename pairs with an optional flag, “digital” or “analog”, to override the digital bit in the EDID which is used by the driver to determine whether to use the analog or digital encoder associated with a DVI-I port.

  EXABYTE 8MM TAPE DRIVER

EXA is a newer acceleration architecture with better performance for the Render and Composite extensions. If you have a panel with timings different from that of a standard VESA mode, you ayi to provide this information through the Modeline. Option “DisplayPriority” ” string “.

HCL:AMD video cards – openSUSE Wiki

This attribute is useful for things like clone mode where the user can best decide which display should be synced. Chooses between available acceleration architectures. Do not use EDID data for mode validation. This option allows you to enable to disable the DRI. Please refer to xorg. Used only when the DRI is enabled. Option videoo ” boolean “. Enable dynamic clock gating. This sets the overlay scaler buffer width.

Make sure your OpenGL renderer string does not say “software rasterizer” or “llvmpipe” because that would mean you have no 3D hardware acceleration: It has two values: This is not an exhaustive list. Enable this option if you are having problems with a washed out display on the secondary DAC.

  JM COETZEE DOROTHY DRIVER

Advanced Micro Devices, Inc. This generally solves the problem. The default value is 0x1E.

Introduction

Accepted values range from todivisible by On Linux, the driver will attempt to detect the MacModel automatically. Tiling will be disabled if the virtual x resolution exceeds for R and aboveor if DRI is enabled and the drm module is too old. Xorg 1xorg. Enable AGP vudeo writes.

AMD/ATI drivers for mobility / notebook graphics and Microsoft Windows

DDC is still used for monitor detection. This can help reduce heat vudeo increase battery life by reducing power usage at the expense of performance. Force subpixel order to specified order.